NO HOT WATER? Follow These EASY Tips
NO HOT WATER? Follow These EASY Tips
Blog Article
Just about everyone seems to have their unique idea when it comes to How to Troubleshoot and Repair an Electric Water Heater.
Several modern houses take advantage of an electrical hot water heater for their heating unit, because of its ease and simplicity of use. Nevertheless, similar to any other electrical home appliances, troubles may occur with its use, unexpectedly. It can be truly irritating to awaken to a cold shower rather than a warm one or having your bath with water that isn't hot adequate or even as well hot. Whatever the instance may be, hot water heater problems can be fairly nerve-racking. The good news is, we've made a checklist of possible options to your water heater concerns. There are a number of aspects that could trigger a lot of these troubles, it could be a problem with the power supply, the electric heating element, or the thermostat. Prior to doing anything, guarantee you switch off the primary power supply for security. Whatever the trouble is, getting it repaired need to not position excessive of a concern if you follow these actions:
Check Your Power Supply:
As basic as this may seem, it is really essential. Without adequate power, your water heater will not operate. So the first thing to do when your water instantly retires is to validate that it isn't a power problem. Check if the fuse is blown out or the circuit breaker stumbled. If the breaker is the concern, simply turn it off and on again. Replace any type of busted or damaged fuse. Examine the appliance with power after these changes to see if it's now working.
Inspect the Heating Element in the Water Heater:
If it's not a power issue, then try taking a look at your heating element if it is still functioning. Check each of your burner to ensure the trouble isn't with any one of them. If any one of them is damaged, change that component and after that inspect whether the hot water is back on.
Inspect Your Thermostat:
If your water heater still isn't working or the water coming out isn't hot enough, you may need to inspect the temperature level setups on your top thermostat. Make sure the breaker is turned off prior to doing anything. Open up the gain access to panel as well as press the red button for temperature reset above the thermostat. This ought to aid warm the water. Transform the breaker back on and also examine if the issue has been fixed.
Call A Professional:
If after replacing all damaged components and also resetting your temperature level, the hot water heater still isn't functioning, you may need to contact an expert plumber for a professional point of view. The trouble with your heating system could be that the cold and hot taps have been switched over or it might be undersized for the quantity of hot water needed in your home. Whatever the instance might be, an expert plumber would help address the trouble.
Final thought
Water heater troubles are not constantly significant. A lot of them are due to small concerns like a blown fuse or worn-out heating element. Changing the malfunctioning parts need to suffice. Nevertheless, if you are still unable to address the issue, give a call to your closest plumber to come to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our section about How to Troubleshoot and Repair an Electric Water Heater. Thanks for finding the time to browse our post. Sharing is nice. You just don't know, you will be helping someone out. Thank you for your time. Don't hesitate to visit our blog back soon.
Book A Free Estimate
Report this page